Shop
1-800-221-0714
Fax: 732-291-8154
Email: Info@ekci.com
sales@kuhnkeusa.com

Panel Mounted Pneumatic Predetermining CounterItem # 50680

Counter is used for selecting the number of desired operations on a production run. The number of operations is set on the lower scale by holding down a white button and setting the count to be reached. The upper scale is a 5 digit totalizer. When the count reaches the lower scale setting, a built-in 3 way valve is switched to provide a pneumatic output to stop machine or signal that the count has been reached. Valve remains switched until counter is reset.

The counter operates with an impulse pressure between 30-115 PSI and can be reset either manually via a reset button or by a pneumatic signal to a specially provided port.
Item #50680
Operating Pressure Range30 to 115 psi
Connections10-32 (M5) ports
DisplayBlack with white digits (5 numbers)
ResetManual button on cover or pneumatic signal of 180 ms duration.
MediaFiltered Air
Control ConnectionsPort Z - Counter pulse input
Port Y - Reset
Port P - Supply air to 3 way valve
Port A - Output signal from valve
Duty CycleContinuous
Min. pulse duration 8 ms
Min. pause 10 ms
Operating Ambient0 to +60 ºC
32 to 140 ºF
Weight4 oz.
MaterialsMolded Body
Face Plate Width2 3/8 in.
Face Plate Height3 in.
Behind Panel Depth2 1/2 in.
Behind Panel Height2 in.
Behind Panel Width2 in.
Panel Cut Out2 in. W x 11/16 in. H


If you are looking for Pneumatic Controls, Pneumatic Valves then look no further than Ellis/Kuhnke Controls.