Fax: 732-291-8154

Panel Mounted Pneumatic Predetermining Counter

Counter is used for selecting the number of desired operations on a production run. The number of operations is set on the lower scale by holding down a white button and setting the count to be reached. The upper scale is a 5 digit totalizer. When the count reaches the lower scale setting, a built-in 3 way valve is switched to provide a pneumatic output to stop machine or signal that the count has been reached. Valve remains switched until counter is reset.

The counter operates with an impulse pressure between 30-115 PSI and can be reset either manually via a reset button or by a pneumatic signal to a specially provided port.
Compare / Request
up to 5 items
Item #Operating Pressure RangeConnectionsDisplayResetMediaControl ConnectionsDuty CycleOperating AmbientWeightMaterialsFace Plate WidthFace Plate HeightBehind Panel DepthBehind Panel HeightBehind Panel WidthPanel Cut Out
5068030 to 115 psi10-32 (M5) portsBlack with white digits (5 numbers)Manual button on cover or pneumatic signal of 180 ms duration.Filtered AirPort Z - Counter pulse input
Port Y - Reset
Port P - Supply air to 3 way valve
Port A - Output signal from valve
Min. pulse duration 8 ms
Min. pause 10 ms
0 to +60 C
32 to 140 F
4 oz.Molded Body2 3/8 in.3 in.2 1/2 in.2 in.2 in.2 in. W x 11/16 in. H
If you are looking for Pneumatic Controls, Pneumatic Valves then look no further than Ellis/Kuhnke Controls.