Fax: 732-291-8154
Email: Info@ekci.com

Solenoid Operated Oscillator Valve

Valve can be used to oscillate a double acting cylinder. Applications include mixing, stirring or sawing devices where time critical cycling is not required. While the solenoid is energized, the valve oscillates. Speed is dependent on connected volume and line pressure, and can be controlled by the addition of flow control valves on the cylinder input ports. Typical speed is 16 cycles per minute at 90 PSI. Minimum operating pressure 35 PSI.

Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Pilot port size is 1/8. Mounting via 4 through body holes 3/16" Dia.
Oscillator valve will not operate if applied on vented applications such as an air gun. Working ports must have a connected defined volume.
For valve specifications see appendix. For detail dimensions contact factory.
Compare / Request
up to 5 items
Item #Port TypeOrificeBody No.LengthWidthHeight
75083-90-001/8 NPT Port0.236 in.
6 mm
8S6 3/4 in.2 in.2 1/8 in.
76083-90-001/8 Metric Port0.236 in.
6 mm
8S6 3/4 in.2 in.2 1/8 in.