Oscillator Valve, Pneumatic Actuation : Ellis/Kuhnke Controls

Valve can be used to oscillate a double acting cylinder. Applications include mixing, stirring or sawing devices where time critical cycling is not required. A pneumatic control signal applied to the control port starts valve oscillating. Speed is dependent on connected volume and line pressure, and can be controlled by the addition of flow control valves on the cylinder input ports. Typical speed is 16 cycles per minute at 90 PSI.

Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Pilot port size is 1/8. Mounting via 4 through body holes 3/16" Dia.
Oscillator valve will not operate if applied on vented applications such as an air motor. Working ports must have a connected defined volume.

For valve specifications see appendix. For detail dimensions contact factory.

Item #	Port Type	Orifice	Body No.	Length	Width	Height
75083-90-42	1/8 NPT Ports (USA Std.)	0.236 in. 6 mm	8S	6 3/4 in.	2 in.	2 1/8 in.
76083-90-42	1/8 Metric Ports (European Std.)	0.236 in. 6 mm	8S	6 3/4 in.	2 in.	2 1/8 in.

Item #

Port Type

Orifice

Body No.

Length

Width

Height

75083-90-42

1/8 NPT Ports (USA Std.)

0.236 in.
6 mm

6 3/4 in.

2 in.

2 1/8 in.

76083-90-42

1/8 Metric Ports (European Std.)

0.236 in.
6 mm

6 3/4 in.

2 in.

2 1/8 in.