Miniature Screw Driver Adjusted Pressure RegulatorItem # 48255-70US
The Series 48 regulator is designed for mounting in panel interiors. Two (10-32) tapped holes are provided in the side of the housing for attachment to panel or mounting brackets. Ports (2) are 180° apart on the sides of the unit housing.
A variety of regulation ranges is available to suit most applications. Special designs are available.
| Item # | 48255-70US |
| Diagrams |  Non- Relieving |
| Secondary Pressure Regulation Range | 0 - 20 psi (1.3 Bar) |
| Operating Pressure Range | 0 to 145 psi |
| Port Type | 1/8 NPT ports |
| Regulator Range | 0 to 75 psi |
| Porting | 10-32 (M5) or 1/8 |
| Flow Rate | Dependent on regulator model. |
| Media | Filtered Air |
| Types | Non-Relieving. Single stage, diaphragm/spring construction |
| Response Time | Dependent on secondary volume. Response average: 45ms at 20% loss of secondary air pressure; 100ms at 50% loss of secondary air pressure. |
| Adjustment | Equipped with locking nut to prevent tampering after setting is made Screw driver |
| Materials | Buna N Seals Brass Housing (Nickel Plated) Stainless Interior Parts Brass Interior Parts Polyamide Cover |
| Operating Ambient | 0 to +60 ºC 32 to 140 ºF |
| Height | 1 5/8 in. |
| Width | 1 3/16 in² |
| Weight | 6 oz. |
| Mounting | Via (2) 10-32 tapped holes on side of housing Mounting bracket available |
| Operation | Relieving type regulators allow excessive pressure on the secondary side of the regulator to bleed off to the atmosphere, helping maintain steady pressure. Non-relieving types are used where pressure build up is not a concern as in air motors, or air gun |
- Flow Chart
- Ellis/Kuhnke Controls
132 Lewis Street Unit A-2, Eatontown, N.J. 07724
Phone: 1-800-221-0714
Fax: 732-291-8154
Email: Info@ekci.com
- Home Pneumatic Controls Technical Info CAD Drawings Contact Us Pneumatic Timers Blog Site Map
If you are looking for Pneumatic Controls, Pneumatic Valves then look no further than Ellis/Kuhnke Controls.