Pneumatic Timers
Pneumatic Indicators
Pneumatic Counters
Pneumatic Spool Valves
Other Products

Technical Specifications: PT Series



Operating Pressure
5 to 140 PSI
Connections
1/8 NPTF ports
Control Pressure
5 to 140 PSI
Media
Filtered air or non-aggressive gas, non lubricated
Output Valve
Cv - 0.25
Flow @ 100 PSI - 9 CFM
Multi purpose 3 way spool
Dial Indicator
Displays set time
Timing Start
On Delay - Application of pilot pressure to control port C.
Off Delay - Removal of pilot pressure from control port C.
Reset
On Delay - By removal of pilot pressure from control port C.
Off Delay - By applying pilot pressure to control port C
Reset Time
60 ms @ 50 PSI
Repeatability
Up to 200 sec. - ±5%
Over 200 sec. - ±10%
Time Setting
Via front dial knob. Accuracy ±10%
Operation
Timing cycle uses atmospheric pressure drawn into vacuum
Materials
Zamak die cast housing, polycarbonate knob, aluminum valve with SS spool and sleeve.
Operating Ambient
-30°C to 70°C (-20°F to 165°F)
Dimensions (inches)
Height 2 1/2"
Width 2 1/2"
Depth 5 1/4"
Mounting
Surface or large faceplate panel mounting

ELLIS/KUHNKE CONTROLS
26 West Highland Avenue, Atlantic Highlands, N.J. 07716
1-800-221-0714
Fax: 732-291-8154
E-mail:
Copyright ©2004 Ellis Kuhnke Controls