Ellis/Kuhnke Controls - Pneumatic Timers, Pneumatic Indicators, Pneumatic Counters, Pneumatic Spool Valves

A = 0.1 - 1.0 seconds
B = 0.5 - 5.0 seconds
C = 1.5 - 15.0 seconds
D = 5.0 - 50.0 seconds
E = 20.0 - 200.0 seconds
F = 1.0 - 10.0 minutes
H = 3.0 - 30.0 minutes
I = 6.0 - 60.0 minutes
K = 1.0 - 300.0 seconds

Options

Y1 = Horizontal calib. Of models 31 & 41
SS = Stainless steel fitting for pilot port
DS = Dial stop- set at factory to prevent setting above or below a given number
TP = Tamper proof cover

Port Identification

C - Control input signal
1 - Input/Output 1
2 - Input/Output 2
3 - Input/Output 3

Timer Bottom View

Valve Connection Options

3 AS INPUT

Turns off output when timed out. Passes air from port 3 to 2 while timing. Dumps (vents) air from 2 to 1 when timed out.

2 AS INPUT

DIVERTER - During timing air flows from port 2 to 3. After timing output is switched from port 3 to 1.

1 AS INPUT

Turns on output after time delay. Dumps (vents) air from port 2 to port 3 while timing. Air flows from port 1 to port 2 after timing.

ELLIS/KUHNKE CONTROLS
26 West Highland Avenue, Atlantic Highlands, N.J. 07716
1-800-221-0714
Fax: 732-291-8154
E-mail: info@ekci.com