Timer is supplied with separate (isolated)
control input signal (Port 12)
1/8" NPT Ported
Timers
Timer is supplied, as standard, with plugged
pilot port (12) for "on-line" timing. To provide connections
for a separate (isolated) pilot signal, remove 1/8" plug
port 12. Insert a 10-32 or (M5) plug into the internal port
(inside port 12), use loctite or equal to seal the port. Then
connect a separate pilot input signal at port 12.
Port Identification
Port 12 - Control input
signal Port 1 - Air supply to valve Port 2 - Valve output
