Shop
1-800-221-0714
Fax: 732-291-8154
Email: Info@ekci.com
sales@kuhnkeusa.com

3 Position Valves (4 Way), Solenoid Operated (Spool Design, Flat Mounting)

Three position valves can be used to position cylinder piston rods or switch air supplies to alternate devices. Flat mounted spool valves are available in 2 versions; with all ports open or all ports closed in the center (off) position. Springs return the valve to the center position when the coil power is switched off.

Operating pressure range is 35 to 145 PSI.
Through body mounting holes are 3/16".
For valve specifications see appendix. See valve accessory section for electrical connectors. For detail dimensions contact factory.
Compare / Request
up to 5 items
Item #DescriptionPort TypeOrificeBody No.
75024-05-00Double Solenoid All ports open in center position1/8 NPT Port (USA Std.)0.236 in.
6 mm		8S
75044-05-00Double Solenoid All ports open in center position1/4 NPT Port (USA Std.)0.315 in.
8 mm		5S
75024-15-00Double Solenoid All ports closed in center position.1/8 NPT Port (USA Std.)0.236 in.
6 mm		8S
75044-15-00Double Solenoid All ports closed in center position.1/4 NPT Port (USA Std.)0.315 in.
8 mm		5S
76024-05-00Double Solenoid All ports open in center position1/8 Metric Port (European Std.)0.236 in.
6 mm		8S
76044-05-00Double Solenoid All ports open in center position1/4 Metric Port (European Std.)0.315 in.
8 mm		5S
76024-15-00Double Solenoid All ports closed in center position.1/8 Metric Port (European Std.)0.236 in.
6 mm		8S
76044-15-00Double Solenoid All ports closed in center position.1/4 Metric Port (European Std.)0.315 in.
8 mm		5S
If you are looking for Pneumatic Controls, Pneumatic Valves then look no further than Ellis/Kuhnke Controls.