1-800-221-0714
Fax: 732-291-8154
Email: Info@ekci.com
sales@kuhnkeusa.com

Manifold Mounted Miniature Pressure RegulatorItem # 50806-00-25-00

The manifold mounted regulator was designed for use on custom manifolds. The miniature regulator is available in both relieving and non-relieving versions in a molded housing.

The unit is screw driver adjustable and is equipped with a locking ring to prevent tampering after the setting is made.

Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Item #50806-00-25-00
DiagramsRelieving
Secondary Pressure Regulation Range0 - 35 psi (2.5 Bar)
Operating Pressure Range0 to 145 psi
Regulator Range0 to 75 psi
PortingManifold Mounted
Flow RateDependent on regulator model.
MediaFiltered Air
TypesRelieving Single stage, diaphragm/spring construction
Response TimeDependent on secondary volume. Response average: 45ms at 20% loss of secondary air pressure; 100ms at 50% loss of secondary air pressure.
AdjustmentScrew driver Adj. Equipped with locking nut to prevent tampering after setting is made
MaterialsBuna N Seals
Stainless Interior Parts
Brass Interior Parts
Molded POM Housing
Operating Ambient0 to +60 C
32 to 140 F
Height1 9/16 in.
Width1 3/16 in²
Weight2 oz.
Drilling PlanRegulator Bottom View
(Dimensions in millimeters)
Relieving type regulators allow excessive pressure on the secondary side of the regulator to bleed off to the atmosphere, helping maintain steady pressure. Non-relieving types are used where pressure build up is not a concern as in air motors, or air gun applications etc.
  • Flow Chart
    Flow Chart